Default settings of the LONGSHINE LCS-WA3-50
Here you can find the default IP address and the predefined access data for the user interface of the LCS-WA3-50 Wireless 300 Mbps router of LONGSHINE. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the LONGSHINE LCS-WA3-50, you have to do the following steps for access:
- Turn on router
- Connect the device via network cable with the router
- Open browser
- Enter IP address in the address line and confirm with ‘Enter’ button
- Enter username in the open interface and confirm once more
Reset default settings
Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the LONGSHINE LCS-WA3-50 to its default settings, you have to do the following steps:
- Switch on router
- For at least 6 seconds, press the Reset button
- Device restarts automatically
- Router has been reset to factory settings
After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.