Default settings of the LogiLink WL0143
Here you can find the default IP address and the username and password for the user interface of the LogiLink WL0143 Wireless 450 Mbit/s Dual-Band router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this site, you will find a manual for accessing the router’s user interface.
Login data for the user interface
- IP address:
- 192.168.2.1
- Username:
- admin
- Password:
- 1234
Preconfigured Wi-Fi settings
- SSID:
- starts with WL0143_
- Password:
- <blank>
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the LogiLink WL0143, you have to do the following steps for access:
- Switch on router
- Set up a connection between the device and the router via Wi-Fi* or network cable
- Open browser
- Enter IP address in the address bar and then confirm with ‘Enter’ key
- Enter username and password in the open interface and confirm once more
This router can also be configured with the provided software.
* Make sure that your router’s Wi-Fi is activated.