routerdefaults.ORG IP addresses, usernames, passwords, and more

Default settings of the DrayTek Vigor2500

Here you can find the default IP address and the predefined access data for the user interface of the Vigor2500 ADSL Annex A / Annex B router of DrayTek. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.1.1
Username:
<blank>
Password:
<blank>

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the DrayTek Vigor2500, you have to do the following steps for access:

  1. Put router into operation
  2. Establish a connection between the device and the router via network cable
  3. Open web browser
  4. Insert IP address in the address bar and confirm with ‘Enter’ button
  5. Enter password in the open interface and confirm once more

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the DrayTek Vigor2500 to its default settings, you have to do the following steps:

  1. Put router into operation
  2. Press Factory Reset button and hold for at least 5 seconds
  3. Restart of the device is automatically executed
  4. Restoration of standard settings is finished

Execute software reset

With the DrayTek Vigor2500, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.