Default settings of the Sweex MO201
Here you find the default IP address as well as the username and password for the user interface of the Sweex MO201 ADSL2/2+ (Annex A) router. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
Access to the user interface
Accessing the user interface is necessary when you want to change the configuration of the router. For the Sweex MO201, you have to do the following steps for access:
- Switch on router
- Establish a connection between the device and the router via network cable
- Start web browser
- Enter IP address in the address bar and then confirm with ‘Enter’ key
- Enter username and password in the open user interface and confirm again
Reset default settings
Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but also all configurations you may have made.
Execute hardware reset
To reset the Sweex MO201 to its default settings, you have to do the following steps:
- Turn on router
- Press Reset button for at least 15 seconds
- Restart of the device is automatically executed
- Restoration of standard settings is finished
Execute software reset
With the Sweex MO201, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.
After you have successfully executed the steps mentioned above, the configuration of the router has been reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.