DE | EN | ES

Default settings of the LogiLink WL0130

Here you find the default IP address as well as the username and password for the user interface of the LogiLink WL0130 300 Mbps Wireless N router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this site, you will find a manual for accessing the router’s user interface.

Login data for the user interface

IP address:
192.168.2.1
Username:
admin
Password:
1234

Preconfigured Wi-Fi settings

SSID:
Logilink
Password:
<blank>

Access to the user interface

Accessing the user interface is necessary when you want to change the configuration of the router. For the LogiLink WL0130, you have to do the following steps for access:

  1. Turn on router
  2. Establish a connection between the device and the router via network cable or Wi-Fi*
  3. Open browser
  4. Enter IP address in the address line and confirm with ‘Enter’ button
  5. Enter username and password in the open interface and confirm once more

* Make sure that your router’s Wi-Fi is activated.

By using this website you agree to the use of cookies. Learn more about it.